Details

---

WEH® Connector TW141
For straight tubes | Tube OD 6.0 mm | Lever actuation | Vacuum to max. 100 bar
Part no. C1-14967-X2

The WEH® TW141 quick connector is specially designed for pressure, leak, and function testing of straight tubes, as well as for filling closed cooling circuits with refrigerants. Suitable for tube outer diameters from 6.0 mm to 22.2 mm, this connector enables secure, leak-tight connections within seconds—without the need for hand tightening or additional sealants.

Its innovative jaw locking mechanism minimizes surface pressure, reducing the risk of deforming the test piece. The lever-actuated design ensures easy and ergonomic handling, while eliminating lateral forces during connection and disconnection.

For enhanced safety, the connector features internal pressure support, preventing disconnection under pressure higher than 5 bar. The NBR front seal is easily replaceable, minimizing maintenance downtime.

Key Features:

• For straight tubes with outer diameter Ø 6.0 mm

• Lever actuation with ergonomic design

• Leak-tight sealing on the outer tube diameter

• No hand tightening or additional tools required

• Integrated safety mechanism: prevents disconnection under pressure

• Durable construction with corrosion-resistant stainless steel and anodized aluminium

• Jaw locking mechanism reduces surface pressure on test piece

Specifications:

• Operating pressure: Vacuum up to 100 bar (1,450 psi)

• Temperature range: -10 °C to +80 °C

• Media inlet: NPT 1/4" male thread

• Max. surface finish (test piece): Rz8 μm

• Max. material hardness (test piece): 28 HRC

• Leak rate: 1 x 10⁻³ mbar·l/s

• Sealing material: NBR

• Actuation: Manual via lever

• Nominal bore: DN 3 to 5 mm (depending on design)